Shower screen Walk-In shower enclosure GRAZIA FROST 120x200cm 8mm safety glass

Modern walk-in shower screen GRAZIA FROST 120x200cm

The shower partitions are very popular because of the versatile furnishing options. A GRAZIA FROST shower screen 120x200cm can be installed in any suitable corner. In addition, your bathroom looks very elegant and stylish thanks to the frosted glass.

The glass panes are made from 8mm toughened safety glass with the EasyClean coating. This surface coating easily repels the water and dirt.

Our walk-in shower screens made from real glass are all the rage. They can be ordered in different versions and sizes. The shower wall offers you many advantages. A barrier-free shower can be used better with an open access without a door. This means that this shower enclosure is also ideal for the senior bathroom or for people with disabilities.

We always have glass partitions from 1000 to 1400mm in stock. We can deliver your new shower enclosure quickly and cheaply. Modern stabilizing bars and high-quality fittings ensure security and an elegant look.

The shower enclosure can be combined with a stylish shower channel flush with the floor as well as with a matching shower tray .

The installation of the shower screen is quick and easy, even without specialist knowledge. The universal construction is suitable for either left or right mounting. The shower can also be set up on the floor level. The complete assembly accessories are included in the scope of delivery.

Features of the shower enclosure GRAZIA FROST 120x200cm:

• • Panes made of 8 mm safety glass (ESG)
  • EasyClean surface coating
  • up to 15 mm wall compensation
  • 200cm high
  • Upper handrail made of stainless steel : 100 cm (can be shortened as required)
  • including complete mounting accessories
  • Installation on the floor level is also possible
  • high quality aluminum profiles
    
  • frameless glass

Installation of the shower enclosure:

The installation of the corner shower wall can be done in a few hours. It all depends on your skills and the tools available. Those who choose to install a shower enclosure on their own, but who have no experience of doing it themselves, need not worry. This task can also be solved without specialist knowledge.

Step 1:

First you need to attach the mounting profiles in the vertical position and check them with a spirit level. The distances must be measured very precisely. Mark and drill the hole positions. After that you have to insert the dowels and mount the aluminum profiles with the screws.

Step 2:

Insert the shower partition into the mounting profiles. Then check the vertical position of the shower walls with the spirit level and fasten with the screws.

Step 3:

Saw off the support rod to the required length and fasten it.

Step 4:

Seal the edge areas of the shower wall to the walls and the shower tray with silicone. While pulling the trigger of the dispensing gun, guide the tip of the cartridge evenly along the joint. Then smooth the sealant with a putty knife dipped in soapy water. Silicone takes about 24 hours to harden through. During this period, as far as possible, no water should get onto the joints. When the silicone seal is completely dry, you can enjoy the shower process immediately.